Table of Contents
Advertisement
Turn on the PhotoFrame
Note
•
When you connect the PhotoFrame to a power supply,
the PhotoFrame turns on automatically.
When the PhotoFrame is turned off and
connected to the power supply, you can press
BACK|POWER to turn on the PhotoFrame.
» A few seconds later, the home screen
is displayed.
For the first time you turn on the
PhotoFrame:
The screen prompts you to select a language.
/
•
Press
to select a language, and
then press OK to confirm.
Turn off the PhotoFrame
Note
•
You can only turn off the PhotoFrame after all copy and
save actions are complete.
•
To turn off the PhotoFrame, press and hold
BACK|POWER for 2 seconds.
Transfer photos
Caution
•
Do not remove a storage device from the PhotoFrame
when you are transferring photos from the storage
device.
•
Philips does not guarantee the compatibility with all
types of storage device media.
You can play photos on one of the following
storage device that is connected to the
PhotoFrame:
•
Secure Digital (SD)
•
Secure Digital High Capacity (SDHC)
•
Multimedia Card (MMC)
•
Memory Stick (MS)
•
Memory Stick Pro (MS Pro, with adaptor)
•
USB flash drive
1
Insert a storage device into the slot.
EN
7
Advertisement
Table of Contents
