Turn on the PhotoFrame
Note
•
When you connect the PhotoFrame to a
power supply, the PhotoFrame turns on
automatically.
1
When the PhotoFrame is turned off and
connected to the power supply, hold
turn on the PhotoFrame.
For the first time you turn on the
PhotoFrame:
•
The screen prompts you to select a
language.
•
Select a language, and then press
•
The screen prompts you to set time and
date.
10
EN
to
•
OK.
•
If the PhotoFrame is disconnected from the
power supply for a long time, you need set
time and date again after you turn on the
PhotoFrame.
Turn off the PhotoFrame
•
You can only turn off the PhotoFrame after all
copy and save actions are complete.
•
Move the joystick to set time and date,
and then press OK.
Tip
Note
To turn off the PhotoFrame, press and
hold
for about 2 seconds.