Connect A Storage Device; Turn On The Photoframe - Philips 8FF3CME/05 User Manual

Connect a storage device

You can display photos in one of the following
storage device:
• Compact Flash type I
• Secure Digital (SD)
• Secure Digital (SDHC)
• Multimedia Card
• xD card
• Memory Stick
• Memory Stick Pro
• Memory Stick Duo
• Memory Stick Pro Duo
• USB fl ash drive
1
For the USB slot, the
SD/MMC/xD/MS/MS Pro Duo slot, insert
a USB fl ash drive or a memory card fi rmly.
RESET RESET
12 EN
CF slot, or the
• For the SD slot, insert a memory card
until the memory card locks in place.
»
After a few seconds, photos on
the memory card are displayed in
slideshow mode consecutively.
Tip
•
If the memory card is empty or damaged, "[Sorry,
Card/Device error!]" is displayed.
Remove a storage device
• For the USB slot, the
SD/MMC/xD/MS/MS Pro Duo slot, pull
the memory card or USB fl ash drive out.
• For the SD slot, push the memory card
again to unlock and then pull out the
memory card.
Tip
•
If a 2G xD card is used with a USB drive, the system
may be unstable. Remove the xD card or the USB fl ash
drive.

Turn on the PhotoFrame

1
Press and hold
»
Photos are displayed in Slideshow
mode in the following priority:
»
SD/MMC/xD/MS/MS Pro Duo slot
»
SD slot
»
CF slot
»
slot
»
PhotoFrame
• To turn off the PhotoFrame, press and hold
for more than 2 seconds.
• To access the main menu, press .
CF slot, or the
for more than 1 second.