Checking, Maintaining And Servicing The Machine ' S Safety Equipment - Husqvarna 356 BT X-series Operator's Manual

Vibration damping system
Y our machine is equipped with a vibration damping system
that is designed to reduce vibration and make operation
easier.
W ARNING! Overexposure to vibration can
!
lead to circulatory damage or nerve damage
in people who have impaired circulation.
Contact your doctor if you experience
symptoms of overexposure to vibration.
Such symptoms include numbness, loss of
feeling, tingling, pricking, pain, loss of
strength, changes in skin colour or
condition. These symptoms normally appear
in the fingers, hands or wrists. The risk
increases at low temperatures.
Muffl er
The m uffler is designed to keep noise levels to a minimum
and to direct exhaust fumes away from the user.
In countries that have a warm and dry climate there is a
significant risk of fire. Consequently, we have equipped the
muffler with a spark arrestor screen mounted inside the
muffler.
For mufflers it is very important that you follow the instructions
on checking, maintaining and servicing your machine. See
instructions under the heading Checking, maintaining and
servicing the machine's safety equipment.
W ARNING!
!
Bear in mind that: Engine exhaust fumes
contain carbon monoxide, which can cause
carbon monoxide poisoning. For this reason
!
you should not start or run the machine
indoors, or anywhere that is poorly
ventilated.
The e xhaust fumes from the engine are hot
and may contain sparks which can start a
fire. Never start the machine indoors or near
combustible material!
6 –
English
SAFETY INSTR UCTIONS
WARNING! The inside of the muffler contain
!
chemicals that may be carcinogenic. Avoid
contact with these elements in the event of a
damaged muffler.
Chec king, maintaining and servicing
the machine ' ' ' ' s safety equipment
WARNING! All servicing and repair work on
!
the machine requires special training. This is
especially true of the machine' ' ' ' s safety
equipment. If your machine fails any of the
checks described below you must contact
your service agent. When you buy any of our
products we guarantee the availability of
professional repairs and service. If the
retailer who sells your machine is not a
servicing dealer, ask him for the address of
your nearest service agent.
Stop s witch
• Start the engine and make sure the engine stops when
you move the stop switch to the stop setting.
Vibration damping system
• Check the vibration damping units regularly for cracks or
deformation. Replace them if damaged.
• Check that the vibration damping element is undamaged
and securely attached.