Retrieving The Last Received Position Data; Receiving A Position Request From Another Station - Raymarine Ray49E Owner's Handbook Manual

Chapter 5: Digital Selective Calling (DSC)
POS REQUEST
ISLANDER
AWAITING
POSIT'N

Retrieving the Last Received Position Data

1. From the DSC Menu, select RECV'D CALLS.
2. Rotate the CH/OK knob or press the up down arrow keys to select POSIT'N
LOG.
3. Press CH/OK . The last received position request data (LAST CALL) is dis-
played.
Only the last position is saved. The next received position will overwrite the existing
Note:
position data.
Press BACK or the CLEAR key to exit.

Receiving a Position Request From Another Station

If you receive a position request from another station, how the Ray49E responds
depends on the option you have set in the Position Reply menu item (see page
90). OFF will not send position data under any circumstances. AUTO sends out
your vessel's position data as soon as it is requested. MANUAL sends out the data
only after you respond to the request.
The 2 alternating pages of data are recorded in the Posit'n Log. The envelope icon
( blinks until automatically accepted or you manually accept the call, reject
)
the call, or open the resulting unread message stored in the Log. See page
"Received Calls (Logs)" on page 84.
When a Manual Position Reply is received, the requesting station's MMSI number
or station name (if entered in the Phonebook) is displayed. Press CH/OK to accept
the request to send your position data. Decline the request by pressing the CLEAR
key.
POSITION
REQUEST
FROM:
SHIP SHAPE
72
73
REPEATS
72
POS RCV'D
50 46.1718N
001 17.7189W
11:57UTC
73
GPS DATA OK
SEND POSIT'N
PRESS [OK] OR
PRESS [CLR]
POS RCV'D
ISLANDER
PRESS [OK]
REPEATS
POSITION
HAS BEEN
SENT
PRESS [OK]
83
72
73