Receiving Group Calls - Raymarine Ray49E Owner's Handbook Manual

78

Receiving Group Calls

The Ray49E can receive Group Routine Calls from anyone in your prearranged
group.
When a Group Call is received, the LCD alternates among 3 screens displaying the
or MMSI ID of the station in the group initiating the call and that a request for a
change of working channels is being made.
The 3 alternating pages of data are recorded in the Call Log. The envelope icon
( blinks until you accept the call, reject the call, or open the resulting unread
)
message stored in the Log. See page "Received Calls (Logs)" on page 84.
GROUP
ROUTINE
GROUP:
023212345
To mute the alert tone:
Press CLEAR. Automatic cancellation takes place after 2 minutes.
To ignore the Group Call:
Press CLEAR a second time. The envelope icon disappears, the call is interrupted
and the normal screen appears on the LCD.
To accept the Group Call:
1. Press CH/OK to change channels to the one designated by the caller. The alert
tone is muted and the envelope icon disappears.
2. Press CH/OK to return to the standby mode. Establish voice communications
on the designated channel by pressing PTT .
If the caller requests that you change to an unsupported working channel the
message INVALID CHANNEL appears on the LCD. If an acknowledgement is sent,
the originating station is sent the message UNABLE TO COMPLY, indicating that
your radio could not make the requested channel change.
l.
08
72
CH HAS BEEN
CHANGED
PRESS [OK]
08
GROUP
ROUTINE
CH CHANGE
REQ TO CH72
REPEATS
Ray49E Marine VHF Radio
08
GROUP
ROUTINE
PRESS OK OR
PRESS CLR
72
SHIP/SHIP
50 46.1718N
001 17.7189W
AM11:57LOC