Washer Features - GE Profile Technical Service Manual
Washer electronic control
Hide thumbs
Also See for Profile:
- Owner's manual and installation instructions (47 pages) ,
- Owner's manual and installation instructions (46 pages) ,
- Owner's manual and installation instructions (138 pages)
Table of Contents
Advertisement
About w asher f eatures.
2nd Rinse Option(onsome models)
When you use extra detergent or bleach
to clean heavily soiled clothes! you may
want to use the 2nd Rinse option. It
provides a second deep cold rinse.
Extended Spin Option(on some models)
Use this option to extract more water from
your clothes. Clothes willbe drier when this
(appearanceand features may vary)
option is selected.
Signal Off Option (on some models)
Some models have a signal that willsound
at the end of the cycle. Ose this option to
turn off the signal.
Spot Spray (on some models)
When you open the washer lidand press SPOT SPRAYbutton, you willsee a
short stream of cold water.
[1J Open thevatler lid.
Q A'essthe
SPOT
SPRAYbutton. (You wll see amort sreem of water.)
[]
Dampen ~ur s:>iledgarment wth the SPOT SPRAY option CI'Idrub ~ur f8\,()rite
pretreatment product into s:>iledarea.
NOTE:
The
SPOT SPRAY
o ptionwll not v.orkif
. the
washer lid is down
. the
w asher tub is filling
. the
w ater
hasalready reachedthelevelyouselected.
Perfectemp
PerlectBmp
sensesthe incomingwater temperature andadjuststhe fill water to obtaina more
precise temperature range for all three wash temperatures.
You may select cold, warm or hot.
For example, in aCold WaS! 9!lection, s:>me'Ml'm water maybe added to rea:::h a
temperature needed to better dhmlve detergents
Often,detergentsare not completely
dissolvedin verycold water,especiallyin cooler climates.
NOTE:
P erlectempwll not adjus the fillon
WARM
WASHunlessthevatler lid isdosed.
Be sure to start the washer after the lid is closed.
6
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Profile and is the answer not in the manual?
Questions and answers
re program to add more water
To add more water to your GE Profile washing machine, follow these steps:
1. Load Items Evenly – Distribute dry items loosely and evenly around the washer basket’s perimeter.
2. Pause and Unlock – If the wash cycle has started, press Start/Pause and wait for the Lid Lock light to turn off before opening.
3. Add More Items – Place additional items around the basket’s outside, close the lid, and press Start to resume.
4. Use Deep Fill – Adjust the load size and select the Deep Fill option to increase the water level.
5. Two-Stage Fill – Some cycles automatically add more water in the second stage.
6. Use Less Water Efficiently – The washer is designed for high efficiency, using less water while maintaining effective cleaning.
By using the Deep Fill option, you can manually increase the water level when needed.
This answer is automatically generated