GE Profile Technical Service Manual page 2
Washer electronic control
Hide thumbs
Also See for Profile:
- Owner's manual and installation instructions (47 pages) ,
- Owner's manual and installation instructions (138 pages) ,
- Owner's manual and installation instructions (138 pages)
Table of Contents
Advertisement
A
IMPORTANT SAFETY NOTICE
The information in this service guide is intended for use by
individuals possessing adequate backgrounds of electrical,
electronic and mechanical experience. Any attempt to repair a
major appliance may result in personal injury and property
damage. The manufacturer or seller cannot be responsible for the
interpretation of this information, nor can it assume any liability in
connection with it's use.
CAUTION
To avoid personal injury, disconnect power before servicing this
product.
If electrical power is required for diagnosis or test
purposes, disconnect the power immediately after performing the
necessary checks.
RECONNECT ALL GROUNDING DEVICES
If grounding wires, screws, straps, clips, nuts, or washers used
to complete a path to ground are removed for service, they must
be returned to their original position and properly fastened.
GE Consumer Service Training
Technician Service Guide
Copyright
@ 2000
All rights reserved. This service guide may not be reproduced in whole or in part
in any form without written permission from the General Electric Company.
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Profile and is the answer not in the manual?
Questions and answers
re program to add more water
To add more water to your GE Profile washing machine, follow these steps:
1. Load Items Evenly – Distribute dry items loosely and evenly around the washer basket’s perimeter.
2. Pause and Unlock – If the wash cycle has started, press Start/Pause and wait for the Lid Lock light to turn off before opening.
3. Add More Items – Place additional items around the basket’s outside, close the lid, and press Start to resume.
4. Use Deep Fill – Adjust the load size and select the Deep Fill option to increase the water level.
5. Two-Stage Fill – Some cycles automatically add more water in the second stage.
6. Use Less Water Efficiently – The washer is designed for high efficiency, using less water while maintaining effective cleaning.
By using the Deep Fill option, you can manually increase the water level when needed.
This answer is automatically generated