Router - Zte MF10 User Manual

MF10 3G Wireless Router User Manual
User Name: Set user name for this APN.
•
Password: Set password for this APN.
•
To add a new APN profile:
1. Click Add to define a new APN profile.
2. Input those parameters as shown above.
Notes:
If you have any problem, please contact with your service provider.
3. Click Save to save this new profile.
4. Click Set default to set this profile as default.

Router

LAN
Select Router > LAN, the LAN parameters are shown in the following figure:
IP Address: LAN IP address of the router.
•
Subnet Mask: Subnet mask of the router.
•
MAC Address: MAC address of the LAN interface.
•
DHCP Type: The router is set up as a DHCP server, which provides IP address in IP pool range for all
•
the computer connections.
DHCP Start IP: Allocate start IP address for IP pool.
•
DHCP End IP: Allocate end IP address for IP pool.
•
DHCP Lease Time: Define how long the leased IP address will be expired.
•
UPNP: Enable UPNP or not.
•
Click Apply to confirm your configuration.
DHCP Clients
Select Router > DHCP Clients, All of the DHCP clients information will be shown in the following
figure:
Confidential and Proprietary Information of ZTE CORPORATION 19