Zte MF10 User Manual page 18

Automatic: Router searches for valid network according to the wireless network.
•
Only WCDMA: Router searches for WCDMA network only.
•
Only GSM: Router searches for GSM network only.
•
Click Apply to confirm your configuration.
APN Setting
Select 3G Settings > APN Setting, the APN parameters are shown in the following figure:
Profile Selection: Select the profile which you want to use for the internet connection.
•
Profile Name: The profile which is set as default.
•
APN Setting: APN address mode. If a fixed APN is given by your service provider, select Manual APN.
•
Otherwise select the Auto APN, and the router will automatically obtain this parameter.
APN: APN string.
•
Dial No.: This dial number is used for data service connection.
•
PDP Type: IP (Default) or PPP.
•
PDP Setting: PDP address mode. If a fixed IP address is given by your service provider, select Manual
•
PDP. Otherwise select the Auto PDP and the router will automatically obtain this parameter.
DNS: Select Auto DNS or Manual DNS.
•
Authentication: Select CHAP or PAP.
•
18 Confidential and Proprietary Information of ZTE CORPORATION
MF10 3G Wireless Router User Manual