Before Requesting Service - Panasonic NN-GF569M Operating Instructions Manual

Microwave / grill oven
Table of Contents

Advertisement

Before Requesting Service

ALL THESE THINGS ARE NORMAL:
The oven causes interference with
my TV.
Steam accumulates on the oven
door and warm air comes from
the oven vents.
I accidentally operate my
microwave oven without any food
in it.
There are humming and clicking
noises from my oven when I cook
by Combination.
The oven has an odor and generates
smoke when using Combination and
Grill function.
PROBLEM
Oven will not turn on.
Oven will not start cooking.
The "
" appears in the
Display Window.
The oven stops cooking by
microwave and "H97" or "H98"
appears in the Display Window.
If it seems there is a problem with the oven, contact an authorized Service Centre.
IP2659_39L40KP_Eng_32_091009.indd 13
IP2659_39L40KP_Eng_32_091009.indd 13
Some radio and TV interference might occur when you cook with the microwave
oven. This interference is similar to the interference caused by small appliances
such as mixers, vacuums, hair dryers, etc. It does not indicate a problem with your
oven.
During cooking, steam and warm air are given off from the food. Most of the steam
and warm air are removed from the oven by the air which circulates in the oven
cavity. However, some steam will condense on cooler surfaces such as the oven
door. This is normal.
Operating the oven empty for a short time will not damage the oven.
However, we do not recommend this to be done.
These noise occur as the oven automatically switches from microwave power to
Grill, to create the Combination setting. This is normal.
It is essential that your oven is wiped out regularly particularly after cooking by
Combination or Grill. Any fat and grease that builds up on the roof and walls of the
oven will begin to smoke if not cleaned.
POSSIBLE CAUSE
The oven is not plugged in securely.
Circuit breaker or fuse is tripped or
blown.
There is a problem with the outlet.
The door is not closed completely.
Start Pad was not pressed after pro-
gramming.
Another program has already
been entered into the oven.
The program has not been entered cor-
rectly.
Stop/Reset Pad has been pressed acci-
dentally.
The Child Safety Lock was activated by
pressing Start Pad 3 times.
This display indicates a problem with the
microwave generation system.
- Eng-13 -
REMEDY
Remove plug from outlet, wait 10
seconds and re-insert.
Contact the specified service center.
Plug another appliance into the outlet to
check if the outlet is working.
Close the oven door securely.
Press Start Pad.
Press Stop/Reset Pad to cancel the pre-
vious program and program again.
Program again according to the
Operating Instructions.
Program oven again.
Deactivate Lock by pressing Stop/Reset
Pad 3 times.
Please contact an authorised Service
Center.
2009-10-9 9:47:16
2009-10-9 9:47:16

Advertisement

Table of Contents
loading

Table of Contents