One-Piece Front Turn Signal Lamps - GMC Jimmy 2004 Owner's Manual

5. Turn the bulb/socket assembly counterclockwise to
remove it.
6. Put the new bulb/socket assembly into the headlamp
assembly and turn it clockwise until it is tight.
7. Plug in the electrical connector.
8. Put the headlamp assembly back into the vehicle.
9. Install the two retaining clips.
10. Close the hood.

One-Piece Front Turn Signal Lamps

1. Remove the headlamp assembly as shown in
"One-Piece Composite Headlamp System"
under Headlamps on page 5-51.
3. Pull the bulb straight out to remove it from the socket.
4. Push the new bulb into the socket until it snaps into
place.
5. Put the bulb socket into the lamp assembly and
turn it clockwise until it is tight.
6. Put the headlamp assembly back into the vehicle.
7. Install the two retaining clips.
8. Close the hood.
2. Twist the bulb socket
to remove it from the
headlamp assembly.
5-53