GMC Jimmy 2004 Owner's Manual page 129

To increase the space in the convenience system,
do the following:
1. Pull up on the individual partitions (C) to remove
them. Storage for the partitions is located in
area (E).
2. Fold the collapsible dividers (A) by pulling upward
and folding the dividers toward each other.
To reinstall or rearrange the partitions, push down
gently on the partitions making sure both sides fit into
the appropriate slots of the collapsible dividers (A).
Located on the top of each collapsible divider (A) are
T-pins designed to hold grocery bags, etc., in an upright
position.
The anchor bracket/cargo tie down plugs (B), located
in the center and on each side of the convenience
system nearest the passenger compartment, are used
to help seal the convenience system. However, the
plugs also cover the anchor bracket/cargo tie-downs.
To remove the plugs, grasp the edges of the plugs and
pull straight out. See Child Restraint Systems on
page 1-37 and Top Strap on page 1-41 for more
information on using anchor brackets.
There are two cutouts (F) for the rear cargo tie-downs
located near the tailgate. In order to access the rear
cargo tie-downs, the cutouts must be removed.
You will also find a soda pop/gallon jug holder (D)
on the passenger side of the convenience system. Some
vehicles do not have this feature, but instead include
a smaller storage area.
To remove the entire convenience system, do the
following:
1. Remove the convenience net if it is in place.
See Convenience Net on page 2-61 for more
information. You may also want to remove the
partitions (C) and fold the collapsible dividers (A)
to make the convenience system easier to handle.
2. Grasp the sides of the convenience system and
push the sides together while sliding the unit out
until it clears the sides of the tailgate opening.
To reinstall the convenience system, reverse the
removal procedure.
2-63