Windshield Wipers - GMC Jimmy 2004 Owner's Manual

Windshield Wipers

To operate the windshield wipers turn the band, located
on the multifunction lever, upward or downward.
MIST: Turn the band to MIST for a single wiping cycle.
Hold it until the windshield wipers start. Then let
it go. The windshield wipers will stop after one wipe. If
you want more wipes, hold the band on MIST longer.
OFF: Turn the band to OFF to turn off the windshield
wipers.
LO (Low Speed): Turn the band away from you to LO
and past the delay settings for steady wiping at low
speed.
HI (High Speed): Turn the band away from you, to HI,
and past the delay settings for wiping steady at high
speed.
Delayed Wiping: You can set the wiper speed for a
long or short delay between wipes. Turn the band
to choose the delay time. The closer to LO, the shorter
the delay.
3-8
J PUSH (Windshield Washer): There is a paddle
marked with the windshield washer symbol at the top of
the multifunction lever. To spray washer fluid on the
windshield, push the paddle. The wipers will clear the
window and then either stop or return to your preset
speed.
Be sure to clear ice and snow from the wiper blades
before using them. If they're frozen to the windshield,
carefully loosen or thaw them. If your blades do become
worn or damaged, get new blades or blade inserts.
Heavy snow or ice can overload your wipers. A circuit
breaker will stop them until the motor cools. Clear away
snow or ice to prevent an overload.
CAUTION:
{
In freezing weather, do not use your washer
until the windshield is warmed. Otherwise the
washer fluid can form ice on the windshield,
blocking your vision.