Table of Contents
Advertisement
Connections
Before making connections:
•
First turn off the power of all the attached equipment and make connections.
•
Refer to the user manual included with each separate piece of equipment.
DVI-D
Computer
56P-QF60LCU
(Rear panel)
Recommended video signal timing for this product is as follows.
Resolution
1920×1080
•
To display images at a resolution of 3840x2160, input 1920x1080 signal to each of INPUT 1 to 4 connectors.
•
The image of 2544x1080 signal can not display correctly.
•
Images may not be displayed correctly depending on the type of video card or driver.
•
Signals input to INPUT 1 to 4 connectors are laid out on the screen as follows.
INPUT
INPUT
1
3
INPUT
INPUT
2
4
Connect the power cord
1. Insert one end of the power cord into the power input connector of this product.
Insert it as far as it will go.
2. Clamp the power cord using the clamper.
3. Plug the power cord in a wall outlet.
•
The power outlet socket should be installed as near to the equipment as possible, and should be easily accessible.
•
Fully insert the prongs into the power outlet socket. Loose connection may cause noise.
DVI-D
INPUT1
INPUT2
INPUT3
Frequency
Horizontal
Vertical
67.5 kHz
60 Hz
DVI-D cable
INPUT4
Notes
Each of INPUT 1 to 4 connectors
EN-12
POWER
Clamper
Advertisement
Table of Contents
