Hunter Ashbury 81001 Installation Manual page 7

0 0 0 0 0 0 0 0
A18
0 0 0 0 0 0 0 0
A17
H
Reinstall the motor by inserting the tabs and pushing up
Connect wiring harness. DO NOT ALLOW THE MOTOR TO
into position. Make sure the wires are not pinched
HANG FROM THE WIRING HARNESS.
between the motor and the housing.
A19 A20
I
Secure the motor by tightening the 2 screws. Turn on the power source.
A21
A22
Go to step
O N
C1
O F F
on page 10
to attach grille.
Test the motor. If the motor does not run, check the plug
connection.
41937-01 3/29/2006
7
05-HF-025_EngS_3.29.06.indd 7 3/29/06 7:34:04 PM