SmartNode 4654 and 4658 Series ADSL2+ Multiport ISDN VoIP IAD Quick Start Guide Important —This is a Class A device and is intended for use in a light industrial environment. It is not intended nor approved for use in an industrial or residential environment. —This device is approved for connection to the public ISDN telecommunication network, Approval over BRI/S0-ISDN interfaces.
• The SmartNode contains no user serviceable parts. The equipment shall be returned to Patton Electronics for repairs, or repaired by qualified service personnel. WARNING • Mains Voltage: Do not open the case when the power cord is connected. For systems without a power switch, line voltages are present within the power supply when the power cord is connected.
Straight-through wired cable LAN (ETH 0/0) Laptop PC Connecting to the PC Figure 1. Connect the PC’s Ethernet port to LAN (ETH 0/0) port of the SmartNode 4650 ADSL2+. The SmartNode 4650 ADSL2+ Series is equipped with Auto-MDX Ethernet ports, so you can use straight-through Ethernet cables for host or hub/switch connections.
3.2 Login To access the SmartNode, start the Telnet application on your PC. Type the default IP address into the address field: 192.168.1.1 . Accessing your SmartNode via a Telnet session displays the login screen. Type the factory default login: administrator and leave the password empty. Press the Enter key after the password prompt.
In general, the SmartNode will connect to the network via the WAN (DSL) port. This enables the SmartNode to offer routing services to the PC hosts on LAN (ETH 0/)) port. The SmartNode 4650 ADSL2+ Series provides an auto-MDX feature for both Ethernet ports, so you can use a straight-through or cross-over cable to connect to a host or a switch (see figure 2 Straight-through wired...
Note Patton regularly adds new configuration templates to the collection at www.patton.com/voip, so if you do not see your application on the CD-ROM, it may have been added to the website. If your application is unique and not covered by any of Patton’s configuration templates, you can man- Note ually configure the SmartNode instead of loading a configuration file template.
Telephone support: Standard: +1 (301) 975-1007 (USA), Monday–Friday: 8:00 am to 5:00 pm EST (1300 to • 2200 UTC/GMT) Alternate: +41 (0)31 985 25 55 (Switzerland), Monday–Friday: 8:00 am to 5:00 pm CET (0900 to 1800 • UTC/GMT) Fax: (USA) +1 (253) 663-5693 or +41 (0)31 985 25 26 (Switzerland)
Page 8
B.3 ISDN compliance This device is approved for connection to the public ISDN telecommunication network. When this device is used in North America, it shall be connected to a Network Termina- tion Device and not connected directly to an outside POTS line. CAUTION B.4 CE Declaration of Conformity Product Description:...
Need help?
Do you have a question about the SmartNode 4658 Series and is the answer not in the manual?
Questions and answers