Page 2
• FULLY AUTOMATIC SCANNING No operator controls, codes or Interface: Centronics/ IBM Parallel switches are required. Scanning Priorities: Manual - Step through operation by operator push button. • "LOCK-ON" MANUAL SELECTION. Users can override auto scan- Rotate - The Model 378 continues scan after time-out, with the ning to manually select ports and gain exclusive printer use.
Page 3
A) CONNECTING THE CABLES!! 1) Connect the printer the the Model 378 using a standard IBM PC Parallel Cable with DB-25 on one end and Centronics 36- Pin on the other. Order Patton Part Number 10-15/PC for our 15ft version. 2) Connect the computers to the Model 378 using standard DB-25 male to male cables with all 25 conductors wired straight through.