Camera License Activation
Camera licenses are automatically applied to cameras and activated by the LenovoEMC NRV
device. If your NVR device is not on a network with internet access, the licenses will need to be
manually activated. From the settings tab click on "manual activation" on the lower right side.(see
the red error) This will walk you through the 3 steps to manually activate your camera licenses.
1. Click Generate, this will create a request.lrq file.
2. Click on the Milestone Arcus Activation URL then follow the directions
3. Once you've received the file back from Milestone, click the Select File button and browse to
the downloaded file to install..
Page
|
9