Table of Contents
Advertisement
Getting Started
Before using the Arcus software, make sure that the Lenovo EMC NVR is properly connected to the
network. For more details about setting up and connecting the appliance, please see the
Lenovo
EMC NVR Quick Start Guide.
To begin using Arcus, open a web browser. In the URL box, type in the IP address shown in the
LCD window of the LenovoEMC NVR unit and hit enter. For example, the IP address of this unit
is 147.178.15.43, so the web address of the user interface will be 147.178.15.43.
Tip: The IP address of the LenovoEMC NVR is shown in the LCD screen on the front of the unit
Log In
Once you have entered the IP address and hit enter, you will be directed to the login screen of the
Arcus software. At this point you will be prompted to log in to the Arcus software. If this is the first
time anyone has logged into the box and security isn't enabled, just hit the Log In button, no
password is needed until security is enabled.
Page
|
3
Hide quick links:
Advertisement
Table of Contents
