LevelOne WBR-3406TX User Manual page 40

1.Enable DHCP server.
2.WAN setting: static IP adresse.
3.LAN IP adresse: 192.168.123.254/24.
4.Set RADIUS server IP.
The following test will use the inbuilt 802.1X authentication method such as ,EAP_TLS,
PEAP_CHAPv2(Windows XP with SP1 only), og PEAP_TLS(Windows XP with SP1 only) using the
Smart Card eller other Certificate of the Windows XP Professional.
3. DUT og Windows 2000 Radius Server Setup
3-1-1. Setup Windows 2000 RADIUS Server We have to change authentication method to
MD5_Challenge eller using smart card eller other certificate on RADIUS server accellerding
to the test condition.
3-1-2. Setup DUT 1.Enable the 802.1X (check the "Enable checkbox"). 2.Enter the RADIUS server
IP. 3.Enter the shared key. (The key shared by the RADIUS server og DUT). 4.We will
change 802.1X encryption key length to fit the variable test
condition. 3-1-3. Setup Netwellerk adapter on PC
1.Choose the IEEE802.1X as the authentication method. (Fig 2)
2.Choose MD5-Challenge eller Smart Card eller other Certificate as the EAP
type.
3.If choosing use smart card eller the certificate as the EAP type, we select to
4. We will change EAP type to fit the variable test condition.
5.Set RADIUS server shared key. 6.Configure WEP key og
802.1X setting.
Note.
Figure 2 is a setting picture of Windows XP without service pack 1. If users upgrade to
service pack 1, then they can't see MD5-Challenge from EAP type list any mellere, but
they will get a new Protected EAP (PEAP) option.
use a certificate on this computer. (Fig 3)