Table of Contents
Advertisement
Thank you for purchasing a MAKITA product!
Congratulations on choosing a MAKITA chain saw! We are
confident that you will be satisfied with this modern piece of
equipment.
The DCS40 and DCS4 are light, handy saws with high
performance, a good power-to-weight ratio, and a wide range of
speeds for top utility. The DCS4 are equipped with a starting
valve for simple, reliable, and easy starting.
The long-life "Nikasil"-lined cylinder, tough die-cast magnesi-
um crankcase with sturdy, easy-to-operate central guide-bar
mounting and rugged metal spike bar make this saw a reliable,
hard-working tool.
The automatic chain lubrication with variable-flow oil pump
and maintenance-free electronic ignition ensure trouble-free
operation, while the hand-saving anti-vibration system and
ergonomic grips and controls make work easier, safer, and
less tiring for the user.
The DCS40 and DCS4 chain saws are equipped with the
latest safety features and meet all international standards.
These features include: Hand guards on both handles, grip
throttle lever lock, chain catch, safety saw chain, and chain
brake. The chain brake can be actuated manually, and is also
inertia-actuated automatically in case of kickback.
The following industrial property rights apply: GSM MR 44,
GBM 9059, GBM 96665.
In order to ensure the proper functioning and performance
of your new chain saw, and to safeguard your own perso-
nal safety, it is imperative that you read this instruction
manual thoroughly before operation! Be especially
careful to observe all safety precautions! Failure to
observe these precautions can lead to severe injury or
death!
EU Conformity Declaration
The undersigned, Shigiharu Kominami and Rainer Bergfeld,
as authorized by DOLMAR GmbH, declare that the MAKITA
machines,
Type: 08
EU prototype test certificate No.
DCS410, 411
M6 03 06 24243 052
manufactured by DOLMAR GmbH, Jenfelder Str. 38, 045
Hamburg, Germany, conforms to the basic safety and health
requirements of the applicable EU guidelines:
EU Machine guideline 98/37/ EG, EU EMC guideline 89/336/
EWG (modified by 91/263/ EWG, 92/31/ EWG and 93/68/
EWG), Noise emission 000/4/EG.
The most important standards applied to properly meet the
requirements of the above EU guidelines were: EN 5008-,
EN 5008-, EN 550, EN 608, CISPR .
The conformity assessment procedure 000/4/EG was perfor-
med per Annex V. The measured sound power level (Lwa) is 0
dB(A). The guaranteed sound power level (Ld) is dB(A).
The EU Type-Examination per 98/37/EG was performed by:
TÜV Product Service GMBH, Zertifizierungsstelle, Ridlerstraße
3, D-80339 München.
Hamburg, 8.7.003 for DOLMAR GmbH
Shigiharu Kominami
Managing Director
Rainer Bergfeld
Managing Director
Table of contents
EU conformity declaration ................................................
Packing .................................................................................
Delivery inventory ...............................................................3
Symbols ................................................................................3
SAFETY PRECAUTIONS .....................................................4
General precautions ........................................................4
Protective equipment .......................................................4
Fuels / Refuelling .............................................................5
Putting into operation .......................................................5
Kickback ..........................................................................6
Working behavior/Method of working ........................... 6-7
Transport and storage ......................................................8
Maintenance ....................................................................8
First aid ............................................................................8
Technical data ......................................................................9
Denomination of components ............................................9
PUTTING INTO OPERATION .............................................0
Mounting the guide bar and saw chain .....................0-
Tightening the saw chain ...............................................
Adjusting the chain lubrication ................................. 3-4
Warm start .....................................................................4
Stopping the engine .......................................................4
Checking the chain brake ..............................................4
Checking the chain lubrication .......................................5
Adjusting the carburetor ...................................................5
Working in winter ..............................................................6
MAINTENANCE ..................................................................6
Sharpening the saw chain ....................................... 6-7
Cleaning the brake band and sprocket interior ..............8
Replacing the saw chain ................................................8
Replacing the suction head ...........................................8
Cleaning the air filter ......................................................9
Replacing the spark plug ...............................................9
Instructions for periodic maintenance ............................0
Service, spare parts and guarantee ........................... 0-
Trouble shooting ...............................................................
Extract from spare parts list .............................................
Packing
The MAKITA chain saw will be delivered in a protective cardboard
box to prevent transport damage.
Cardboard is a basic raw material and is consequently reuseable
or suitable for recycling (waste paper recycling).
Page
Hide quick links:
Advertisement
Table of Contents
