TABS
On a blank screen move the cursor to the left margin and type an
asterisk. Press the
asterisk. You should have six asterisks spaced across the screen as
shown below:
*
*
*
Press the
tab marks every time. The first preset tab is five spaces from the left
margin (a normal paragraph indention), and the following tabs are
eight spaces apart. Position the cursor on top of the first asterisk and
move it in three spaces. Press and hold
activate the
then press the
Continue to press the
positions, in addition to the new one. When the cursor jumps down to
the next line, it ignores the new tab position. (But on all the following
lines the cursor will go to all the tab positions—the new one and the
preset ones.) Return the cursor to the first asterisk and press the
key. The new tab mark is still there.
Return the cursor to the left margin. Press
tab mark (three spaces in). Use the
activate the
tab position and clear that one also. Move the cursor back to the left
margin of the same line and press the
should skip two tab positions. Continue pressing the
cursor drops to the next line.
position on this line. (However, both tab positions have been cleared
from all the following lines.)
INVERSE VIDEO
Type the word ATARI. Find the Inverse Video key
once. Type ATARI again. Press the Inverse Video key again and type
ATARI again. Your screen should look like this:
ATARI
Inverse Video creates blue letters on a white background, the inverse
of the normal screen colors. This function is very useful for
highlighting letters in your programs. Just one touch of the Inverse
Video key changes the way the letters are displayed.
key. Every time the cursor stops, type an
*
*
*
key only and notice that it stops at the same preset
function. Move the cursor back to the left margin,
key. The cursor jumps to the newly set tab position.
key. It continues to go to all the preset tab
function. Press the
ATARI
33
and then press
to move it to the first
key with the
key to get to the next
key only. The cursor
did not clear the second tab
and press it just
to
~ key to
key until the
Need help?
Do you have a question about the 65XE and is the answer not in the manual?