Atari 65XE Owner's Manual page 118

132 Invalid Command: The command is invalid for this
device.
133 Device or File Not Open: No OPEN command has
been specified for the device.
134 Bad IOCB
135 IOCB
been sent to a read-only device.
136 EOF: The computer has reached the end of the file.
137 Truncated Record: This error typically occurs when
the record being read is larger than the maximum
record size specified in the call to CIO. (BASIC's
maximum record size is 119 bytes.)
138 Device Time-out: The device doesn't respond.
139 Device NAK: Problems are located at the serial
port or in the peripheral.
140 Serial Bus Input Framing Error: Information was
lost from the peripheral to the computer.
141 Cursor Out of Range: The cursor is out of range
for a particular mode.
142 Serial Bus Data Frame Overrun: lnformation was
lost from the peripheral to the computer.
143 Serial Bus Data Frame Checksum Error:
Information was lost from the peripheral to the
computer.
144 Device Done Error: The user attempted to write on
a write-protected diskette.
145 Read After Write Compare Error: The user tried to
open the Screen Editor with an illegal graphics
mode number.
146 Function Not Implemented: The function was not
implemented in the handler.
147 Insufficient RAM: Not enough RAM memory is left
for operating the selected graphics mode.
1
Number: The device number is illegal.
1
Read-Only Error: A WRITE command has
113