In The Field Techniques - Teknetics Alpha 2000 Owner's Manual

IN THE FIELD TECHNIQUES

PINPOINTING
Accurate pinpointing takes practice
and is best accomplished by
ing" the target area.
1. Once a buried target is indicated
by a good tone response,
continue sweeping the coil over
the target in a narrowing
to-side pattern.
2. Take visual note of the place on
the ground where the "beep"
sounds.
3. Stop the coil directly over this
spot on the ground.
4. Now move the coil straight for-
ward and straight back towards
you a couple of times.
5. Again make visual note of the
spot on the ground at which the
"beep" sounds.
6. If needed, "X" the target at
different angles to "zero in" on the
exact spot on the ground at which
the "beep" sounds.
When pinpointing a target, try drawing an "X",
as illustrated, over where the tone is induced.
COIL MOVEMENT
When swinging the coil, be careful
"X-
to keep it level with the ground
about one inch from the surface.
Never swing the coil like a pendu-
lum.
side-
WRONG
CORRECT
15