Baby Monitor - Panasonic KX-TG8562AZ Operating Instructions Manual

Programming
2
MbN: Select the desired date. a
R To move to another month in the
calendar, keep pressing MCN or MDN.
3
a MbN: "New Entry" a
4
Edit the date if necessary. a
5
Set the desired time. a
6
Enter a text memo (30 characters max.;
page 50). a
7
MbN: Select the desired alarm tone. a
2 times
R You can select "Off" if you prefer not
to hear an alarm tone.
R We recommend selecting a different
ringer tone from the one used for
outside calls.
R To add other entries, repeat from step
3.
8
M N
Note:
R To stop the alarm, press
handset on the base unit or charger.
R When the handset is in use, the alarm will
not sound until the handset is in standby
mode.
Viewing entries
1
(middle soft key) a
2
To see the entries on the selected date,
press .
To see the schedule list, press
R You can see detailed information
about the schedule by pressing
Editing an entry
1
(middle soft key) a
2
a MbN: Select the desired entry.
3
a MbN: "Edit" a
4
Edit the date if necessary. a
5
Edit the time if necessary. a
6
Edit the text memo if necessary (30
characters max.; page 50). a
34
TG8562_8563AZ(en)_0327_ver021.pd34
7
MbN: Select the desired alarm tone. a
8
M
Erasing an entry
Schedule alarm entries are not erased
automatically after the schedule alarm sounds.
Erase unwanted entries.
1
2
3
4
MbN: "Yes" a
5
M
Erasing all entries
1
2
3
MbN: "Erase All" a
or place the
4
MbN: "Yes" a
5
MbN: "Yes" a
6
M

Baby monitor

a
This feature allows you to listen in on a room
where another handset is located, allowing
you to easily monitor from different areas of
.
the house or place. The monitored handset
(placed in a baby's room, for example) will
.
automatically call the monitoring handset or
the phone number stored when it detects
sound.
Important:
a
R You should perform a test run of the baby
monitor procedure to ensure that the baby
monitor feature is set correctly. For
example, test its sensitivity. Check the
connection if you are diverting the baby
monitor to an outside line.
Note:
R Both the monitored and monitoring
handsets must select the same base unit in
34
2 times
N
(middle soft key) a a
a MbN: Select the desired entry.
a MbN: "Erase" a
N
(middle soft key) a a
a
N
2012/03/27 14:08:07