Epson EB-1925W Operation Manual page 88

Troubleshooting
Check
Is Standby Mode set to Network On?
Did a fatal abnormality occur and the projector come to a
sudden stop?
Is power being supplied to the projector?
Is the network cable connected correctly?
For Wired LAN
To use the Mail Notification function when the projector is in standby, set Network On in Standby Mode from
the Configuration Menu.s User's Guide "Extended Menu"
When the projector comes to a sudden stop, mail cannot be sent.
If, after checking the projector, the abnormal status continues, contact your local dealer or the nearest address
provided in the Support and Service Guide. s
Check that there has not been a local power failure or that the circuit breaker for the electrical outlet of the
projector has not been tripped.
Check that the network cable is connected correctly. Reconnect it if it is not connected or not connected properly.
Remedy
Epson Projector Contact List
88