Using The Toolbar - Epson EB-1925W Operation Manual

Connecting to a Projector on a Network and Projecting
K
Clear list
Deletes all search results.
L
IP address (Advanced Connection Mode only)
The projector's IP address is displayed.
M
Display
Select the number displayed (when Use multi-display is selected). s
N
Profile
You can search for a projector on the network using a Profile saved us-
ing Save in the profile.s
O
SSID (Quick Connection Mode only)
The projector's SSID is displayed.
P
Signal intensity
This is displayed when the connection is made in Quick Connection Mode. As
the Signal intensity increases, so does the number of lit indicators.
Q
Update list (Quick Connection Mode only)
Updates Status and Signal intensity.
p.35
p.40

Using the Toolbar

The toolbar is displayed on the computer screen after EasyMP Network
Projection starts and a connection is made with the projector. You can
use this toolbar to operate and make settings for the projector.
Select target projector
Click to limit the projectors operated from the toolbar when projec-
ting from multiple projectors using the distribution function or Mul-
ti-screen display. The indication below the icon shows the projectors
that can be controlled.
ALL indicates that all of the connected projectors can be controlled.
For example, when "1, 3" is displayed, projectors No. 1 and No. 3 can
be controlled.
Click to display the following screen.
A
Select the projector to be controlled.
B
Indicates the No. of an allocated projector. This No. indicates
the No. of the projector that you can control from the toolbar.
C
Indicates the status of the projector.
Stop
22