Epson EB-1925W Operation Manual page 23

Connecting to a Projector on a Network and Projecting
Stops projection while connected to the projector. A black screen is pro-
jected while stopped. Audio does not stop. To stop the audio, or to dis-
play a User's Logo while projection is stopped, use A/V Mute.
Show
Releases Stop or Pause.
Pause
Pauses projected images while connecting to the projector. Audio
does not Pause.
Presentation Mode
Each time this is clicked, Presentation Mode switches between enabled/
disabled. s p.26
Projector control
While the projector is connected to the network, the projector's A/V
Mute, Switch PC source and Switch video source functions can be con-
trolled from both the Remote Control and the projector's Control panel.
Click to display the following toolbar.
A/V Mute
The same function as the [A/V Mute] button on the
Remote Control.
User's Guide "Remote Control"
s
Switch PC source
The Source alternates between Computer1,
Computer2, USB Display, USB1, USB2 and LAN
each time you click.
Switch video source
The Source alternates between S-Video, Video, and
HDMI each time you click.S-Video does not switch
if the cable is not connected.
Screen Preview
Displays the multi-screen preview screen.
Click to display a preview with the settings you have made.
Click the displays to enlarge each Screen Preview to full-screen.
Set options
Transmission performance during the transfer of computer images
can be adjusted.s p.45
Movie Sending Mode
Used to immediately play back a movie file. s
Disconnect
Disconnects the connection to the projector.
Signal intensity
This is displayed when a connection is made in Quick Connection
Mode. As the Signal intensity increases, so does the number of lit indi-
cators.
Switch toolbar display
23
p.27