Epson EB-1925W Operation Manual page 71

Converting PowerPoint Files to Scenarios
H
The Select Copy Location screen is displayed. Select the
drive where the USB storage is connected and the copy
location, and then click "OK".
To set AutoRun, select Play automatically. (AutoRun setting).
The scenario is transferred to the selected destination.
I
When transfer is complete, one of the following screens is
displayed.
When there is no AutoRun file in the USB storage device:
The Continuous Play confirmation screen is displayed. When you
want to create an AutoRun file and set the Continuous Play
setting for the AutoRun file to On, click Yes.
When you want to create an AutoRun file and set the
Continuous Play setting for the AutoRun file to Off, click No.
When there is an AutoRun file in the USB storage device:
Set AutoRun with reference to the following table, and then click
OK.
Select the drive to edit the AutoRun file.
Drive
To start projecting from the first scenario again once
Continuous Play
projection of all scenarios in the "AutoRun File List"
is complete, select this check box.
A list of scenarios for which AutoRun is not set is
File List
displayed. The scenario file is displayed in the format
Folder name/File name.
A list of scenarios for which AutoRun is set is
AutoRun File List
displayed in playback order. Click the
buttons to change the order.
The scenario is registered and deleted in the
AutoRun file.
If there are two or more files set for AutoRun, they are played
q
back in order from the top of the AutoRun File List.
71