Hunter 41931-01 Installation And Operation Manual page 12

7 • Completing Your Installation With or Without a Light Fixture (Continued)
Installing the Glass Bowl
1. First install two B10 candelabra bulbs (60 Watt Maximum) into the
sockets.
2. Attach the extra pull chain (included) to the fan pull chain using the
plastic breakaway connector. (You may find the plastic breakaway
connector on the end of the extra chain.)
3. Thread the fan pull chain through the hole in the metal disk. Then,
thread the fan pull chain through the hole in the center of the glass
bowl.
4. Thread the light pull chain through the hole in the center of the glass
bowl.
5. Place the cover plate up against
the glass bowl. Align the holes in
the cover plate and glass bowl.
6. Thread the fan pull chain and
light pull chain through the
1
appropriate holes.
7. Thread the light pull chain
through the finial and screw the
finial onto the threaded rod end
until tight.
Hunter Fan Company
Light Bulbs
Candelabra
Base 60 Watt
Maximum)
Breakaway
Connector
(B10
Metal Rod
Metal Disk
Glass Bowl
Cover Plate
Finial
41931-01 • 04/14/07