Honeywell Ovale OVD270 Instruction Manual page 9

SPEAKER & SOUND PROFILES (CONTINUED)
Digital Sound Profile
Press the EQ Button on the Remote Control to select the
digital sound equalizer profile you prefer. Press repeatedly
until you reach the desired profile. Choose from 5
equalizer profiles:
1. FLAT
2. POP
3. ROCK ("ROC")
4. JAZZ
5. CLASSIC ("CLAS")
Dynamic Bass Boost Sound Enhancement
DBB on
DBB off
The Dynamic Bass Boost (DBB) Button allows you to
16
SPEAKER & SOUND PROFILES (CONTINUED)
enhance the bass sounds of the speaker. Press the DBB
Button on the Remote Control to switch on Dynamic Bass
Boost. The LED Display Screen will display "dbb1" when
DBB is activated. Press DBB on the Remote Control again
to switch off DBB. The LED Display Screen will display
"dbb0" when DBB has been switched off.
ALARM CLOCK
Setting Up the Alarm Clock Using the Remote Control
PM Alarm
Indicator Indicator
Light Light
To set the Alarm Clock make sure that the Docking
Speaker is in Standby Mode.
1. Press and hold the ALARM Button on the Remote Control
for about 2 seconds to enter the Alarm Setting Mode.
2. Press the and Button to select the alarm type:
• TUN (to wake to your selected FM Radio Station)
• iPod (to wake to your iPod/ iPhone/ iPad music)
• Buzz (to wake to a buzzer sound)
Press the ALARM Button to confirm the alarm type.
3. Press the and Button to select the volume of the
alarm. Press the ALARM Button to confirm the volume
setting.
ALARM CLOCK (CONTINUED)
4. Press the and Button to select the Hour time setting
for the Alarm. Press the ALARM Button to confirm the Hour
setting.
5.
Repeat Step 4 to set the Minute time setting.
6.
Alarm is now set up.
7. Press the ALARM Button once to activate the set alarm.
The Alarm Indicator Light on the LED Display Screen will
turn ON to indicate the Alarm is activated.
Setting Up the Alarm Clock on the Docking Speaker
1.
Press the Button on the Docking Speaker repeatedly
until the LED Display Screen displays "ALA" (Alarm).
2. Press the Button to enter the Alarm Setting Mode.
3.
Press the Button on the Docking Speaker to select the
alarm type:
• TUN (to wake to your selected FM Radio Station)
• iPod (to wake to your iPod/ iPhone/ iPad music)
• Buzz (to wake to a buzzer sound)
Press the Button to confirm the alarm type.
4.
Press the Button to select the volume of the alarm.
Press the Button to confirm the volume setting.
5.
Press the Button to select the Hour time setting for the
Alarm. Press the Button to confirm the Hour setting.
ALARM CLOCK (CONTINUED)
6. Repeat Step 5 to set the Minute time setting.
7. Alarm is now set up.
8. To activate this set Alarm from the Docking Speaker,
/
press the Button during the Alarm set up at
anytime during Step 2 to Step 5. The Alarm Indicator Light
on the LED Display Screen will turn ON to indicate the
Alarm is activated. To activate the Alarm using the Remote
Control, simply press the ALARM Button on the Remote
Control once until you see the Alarm Indicator Light switch
ON.
Deactivating the Set Alarm Clock
Press the ALARM Button on the Remote Control to
deactivate the alarm at any time. The Alarm Indicator
Light will switch off to indicate that the Alarm has been
deactivated and will NOT switch ON again until you press
the ALARM Button again. You can also deactivate the
/
Alarm by pressing the Button on the Docking
Speaker during the Alarm Set Up.
Setting Up a Music Playlist Alarm
If you have chosen the iPod alarm type to wake up to
songs from a selected play list, you need to:
17