Setup
DISPLAY
You can configure the OSD (On Screen Display) settings to your preference.
1.
When the SETUP menu screen is displayed,
select 'LENS' by using the Function Setup
switch so that the arrow indicates 'DISPLAY'.
2.
Press the Function Setup switch to move to the
sub menu items as shown.
CAMERA ID : Specify the display of the
DZOOM MAG : Specify the display of the
INDICATOR : Specify the display of the color
bar.
POINTER : Specify the display of the pointer
and its position.
TEMP AREA : Specify the display of the
ISOTHERM : Specify the display of the
threshold values that are
defi ned in the ISOTHERM menu.
RETURN : Save your OSD settings and return to the main menu screen.
EXIT
Exit the Function Setup menu.
24_ Setup
camera ID.
digital zoom factor.
temperature area and the
display type.
MAIN MENU
SYSTEM
NUC
ALARM
IMAGE
COLOR
► DISPLAY
EXIT
DISPLAY
► CAMERA ID
DZOOM MAG
INDICATOR
POINTER
TEMP AREA
ISOTHERM
RETURN
OFF
OFF
ON
ON
OFF
OFF