Connector specifications and signals
Function
Because Half-duplex communication
is supported, this function is used to
RS485 I/F
update F/W.
(TRX+, TRX-)
Standard users should utilize the
same cables as those employed at
the time of shipment.
Video output
Acts as a composite video signal
(Video)
output.
Power supply
Power Connection Port
(PW+/-)
Notifies users using the LED display
whether the power is ON/OFF, and
LED
whether a device abnormality or
warning has occurred.
Enables operation of the menu
KEY controls
controls.
Explanation
Communication terminator settings:
- Default value: ON
- If multiple cameras are installed :
Switch between NTSC/PAL using
the menu.
AC24V,50/60Hz
Power ON : Lighting
Device Abnormality/Warning :
Flashing
Used to make adjustments.
Notes
Turn only the camera measuring the
furthest distance ON, and the
remaining cameras OFF.
13