Fill Funnel - GE Mabe GLD9312 Technical Service Manual

Fill Funnel

The top section of the fill funnel separates from the
main body. The fill funnel body is held in place by a
nut (located on the inside of the dishwasher).
Rotate the nut counter clockwise to remove the
main body. There is an O-ring seal between the fill
funnel and dishwasher tub. Make certain the O-ring
is fully seated when reinstalling.
Tab
Heating Element
The heating element nuts are located on the
underside of the washer, near the door. Ample
force is required to remove the nuts.
Removing the dishwasher from installation
may be required.
14