Scanning Waypoints - Garmin GPS 40 Owner's Manual & Reference

To rename a stored waypoint:
1. Highlight the 'RENAME?' field and press
2. Enter the new waypoint name and press
E
3. Press the
To delete a stored waypoint:
1. Highlight the 'DELETE?' field and press
L
2. Press the key to select the 'YES' prompt.
E
3. Press to delete the waypoint.

Scanning Waypoints

As you manually enter a waypoint's name, the GPS 40' s
waypoint scanning feature will automatically display the
first numerical or alphabetical match of the character you
have entered to that point. This helps eliminate the need to
always enter a waypoint's complete name.
To scan waypoints from a waypoint field:
1. Highlight the waypoint name field and press
L
2. Press the key to clear the name field.
U
3. Use the and
4. If you have more than one waypoint that begins with the
same letter or number, you must use the
the next character positions as needed. Only the first char-
acter match is listed for each character set.
5. Once you've found the desired waypoint, press
key to confirm your changes.
E
D
keys to scroll through waypoints.
E
.
E
.
.
E
.
R
key to move to
E
.
Reference
Creating &
Using
Waypoints
To delete a waypoint, con-
f i rm the 'Yes?' pro m p t .
Route or active waypoints
may not be deleted until
they are removed from the
route or the GOTO h a s
been cancelled.
The waypoint scanning fea-
ture will offer the first way-
point that matches the char-
acter or characters you
have entered to that point.
27