Advertisement
Product Specifications and Warnings
Please read this manual prior to use.
•
This product is intended for professional use only.
•
This product is designed for damp conditions, but is not suitable for wet locations.
•
Due to risk of injury the safety cable MUST be attached while the product is suspended.
•
The product requires the appropriate power supply. (90-264 VAC, 47-63 Hz)
•
It is not intended for use on dimming circuits.
•
Contact Prism Projection Service and Support prior to any service work or the product warranty may be
voided.
Basic Installation
Before installing this product please make sure that you have read all warnings and safety information provided in this
manual.
The product must be installed in a suitable manner to support the product weight and with the safety cable attached in such
a way that it cannot be removed without releasing the clip. The safety cable should be attached at all times during both
installation and removal of the product.
Safe Mounting
Always install the safety cable provided when mounting the product overhead. To install, loop the safety cable through the
yoke and the support structure and clip the carabineer to the safety cable. Make sure that the loop cannot slip off the support
structure.
Attaching Data and Power Cables
Note: This lighting fixture can be used individually or modules can be daisy chained. In a chain of fixtures each
module can be individually addressed, or each can have its own address wherein each fixture is independent of
the others.
Step 1: If needed attach an appropriate connector to the end of the power cord included with the product. Any connector
you attach to the end of the product must be rated for 15 Amperes and 250VAC, and of the grounding type. The conductors
in the power cable are color coded for ease of assembly.
Wire Color
Green or Green with Yellow Stripe GROUND
Blue or White
Brown or Black
Conductor Function
NEUTRAL
LINE
User Manual - RevEAL Profile Junior – Prism Projection, Inc.
Advertisement
