Philips HD8030 User Manual page 23

4203_000_7242_2_DFU-Luxury_A5_v1.indd 23
4 Empty the bowl (1) and place it back onto the drip tray cover (2).
5 Press the 1-cup button and the 2-cup button simultaneously for
1 second to start the rinsing cycle.
, The activity light and the CALC CLEAN light flash slowly.
During the flushing cycle, water comes out of the coffeemaker in a
,
continuous flow.
6 When the activity light goes out, the 'water tank empty' light goes on
and the CALC CLEAN light flashes quickly, empty the bowl and rinse
and fill the water tank.
7 Press the 1-cup button and the 2-cup button simultaneously for
1 second to start the second rinsing cycle.
When all the water in the water tank has been used up, the
,
complete descaling procedure is finished and the coffeemaker
switches off.
Do not interrupt the rinsing cycles.
Note: If you switch off the coffeemaker before the coffeemaker has completed
two rinsing cycles, the CALC CLEAN light starts flashing quickly when you
switch on the coffeemaker. In that case, you have to perform two rinsing cycles
to make the CALC CLEAN light go out.
EnglisH
23
1/9/13 1:37 PM