Installation - JVC AV-56WP30 Service Manual

INSTALLATION

1. INSTALLATION SITE
1. The rear of this set is provided with ventilation openings. Install the set
more than 5 cm from a wall and in a loc ation with good ventilation.
2. Avoid the following types of locations.
(1) Unstable locations (location must be able to withstand heavy weight).
(2) Locations subjected to direct sunlight.
(3) Near stoves or other heating devices.
(4) Locations subjected to humidity or oily smoke.
(5) Dusty locations.
(6) Locations with s trong vibration.
2. INSTALLATION ADJUSTMENT
When ins talling, moving or changing the orientation of the set, perform
static convergence adjustment acc ording to the following procedure.
1. Press the MENU key of the remote c ontrol unit.
2. Select the "CONVERGENCE" in the INITIAL SETUP menu with Function
▲ / ▼ key.
3. Press the Function / key, the convergence adjustment screen appears
with cross es (+) dis played in 9 loc ations.
Locations where the crosses appear in 3 colours:
Convergence adjus tment is required. Perform steps 4 to 5.
Locations where the crosses are white:
The convergence is adjusted correctly.
" lf all the c rosses are white, no c onvergence adjustment is needed.
4. The locations of the crosses c orrespond to the positions of the number keys on
the remote c ontrol. A box appears around the selec ted cross.
5. Press the SELECT button to change the color of the box to the c olor of the
cross you want to adjust (red or blue).
" You c annot adjust the green cross.
6. Use the / and / buttons to adjust the position of the cross.
" To c anc el the adjustments before completing the procedure, press the EXIT
button.
7. Press the ENTER button to end the c onvergence adjus tment procedure.
" lf you do not use the TV controls for roughly one minute, the convergence
adjustment screen automatically dis appears.
No. 52007
AV-56WP30
(more than 5cm)
Wall
VENTILATION OPENING
Fi g.1
Fi g.2
7