Electrolux Side by Side Refrigerators Service Manual page 63

Step 7
Ejector
Ice Storage Bin Ice Storage Bin
Harvest Cycle
1. Hold Switch closes.
2. Motor energizes.
3. Mold Heater remains energized.
4. Shut Off Arm raises and lowers.
5. Ice dumps into bin.
Step 9
Ejector
Water
Ice
Ice
Ice
Ice Storage Bin
Fill Cycle
1. Near completion of 2nd revolution
of Ejector, Water Fill Switch
closes and water fills mold.
Ejector
Ice Storage Bin
End of Harvest Cycle
1. During end of 2nd revolution,
Mold Heater resets Thermostat.
2. Mold Heater de-energized.
3. If container is full, Control Arm
opens Shut Off Switch.
Ejector
Water
Ice Storage Bin
End of Fill Cycle
1. Hold Switch goes to normally
closed position.
2. Water Fill Switch opens.
3. Freeze Cycle begins.
62
Step 8
Ice
Ice
Ice
Step 10
Ice
Ice
Ice