Recognition) - Buick LaCrosse 2011 Owner's Manual

Ending a Call
Turn the Menu knob and select
Hang Up.
Muting a Call
To Mute a Call
Turn the Menu knob and select
Mute Call.
To Cancel Mute
Turn the Menu knob and select
Mute Call.
Dual Tone Multi-Frequency
(DTMF) Tones
The in vehicle Bluetooth system can
send numbers during a call. This is
used when calling a menu driven
phone system.
1. Turn the Menu knob and select
Enter Number.
2. Enter the character sequence.
See Entering a Character
Sequence in Operation on
page 7 7 for more information.
Bluetooth (Voice

Recognition)

Using Voice Recognition
To use voice recognition, press
located on the steering wheel.
The system responds differently
depending on what kind of
infotainment system the vehicle
has installed.
For vehicles without a navigation
system, the system responds
Ready, followed by a tone.
After the tone, say a command.
For vehicles with a navigation
system, the system responds with
a tone. After the tone say Hands
Free to use the Bluetooth voice
recognition system. The system
then responds with Ready,
followed by a tone. After the
tone, say a command.
For additional information say
Help while you are in a voice
recognition menu.
I n f o r ma t i o n P r o v i d e d b y :
Infotainment System
Pairing
A Bluetooth cell phone must be
paired to the Bluetooth system
and then connected to the vehicle
before it can be used. See your cell
phone manufacturer's user guide for
Bluetooth functions before pairing
the cell phone. If a Bluetooth phone
is not connected, calls will be made
using OnStar Hands Free Calling,
if available. Refer to the OnStar
owner's guide for more information.
Pairing Information
Up to five cell phones can be
paired to the Bluetooth system.
The pairing process is disabled
when the vehicle is moving.
Pairing only needs to be
completed once, unless the
pairing information on the cell
phone changes or the cell phone
is deleted from the system.
7-53