Table of Contents
Advertisement
5-28
Instruments and Controls
Vehicle Information Menu
Items
Press MENU on the turn signal
lever until Vehicle Information Menu
is displayed. Use
to scroll
through the following menu items:
Unit
Tire Pressure
Remaining Oil Life
Battery Voltage
Unit
Move
to switch between
Metric or US when the Unit display
is active. Press SET/CLR to confirm
the setting. This will change the
displays on the cluster and DIC
to either metric or English (US)
measurements.
Tire Pressure
The display will show a vehicle
with the approximate pressures
of all four tires. Tire pressure is
displayed in either kilopascal (kPa)
or pounds per square inch (psi).
See Tire Pressure Monitor System
on page 10 56 and Tire Pressure
Monitor Operation on page 10 57
for more information.
Remaining Oil Life
This display shows an estimate
of the oil's remaining useful life.
If REMAINING OIL LIFE 99% is
displayed, that means 99% of the
current oil life remains.
When the remaining oil life is low,
the CHANGE ENGINE OIL SOON
message will appear on the display.
I n f o r ma t i o n P r o v i d e d b y :
See Engine Oil Messages on
page 5 35. The oil should changed
as soon as possible. See Engine
Oil on page 10 9. In addition
to the engine oil life system
monitoring the oil life, additional
maintenance is recommended
in the Maintenance Schedule
in this manual. See Scheduled
Maintenance on page 11 2 for
more information.
Remember, the Oil Life display
must be reset after each oil change.
It will not reset itself. Also, be
careful not to reset the Oil Life
display accidentally at any time
other than when the oil has just
been changed. It cannot be reset
accurately until the next oil change.
To reset the engine oil life system,
press SET/CLR while the Oil Life
display is active. See Engine Oil
Life System on page 10 13.
Advertisement
Chapters
Table of Contents
