Preventing Damage To The Camcorder; The Camcorder; Package Contents - Medion Life P47010  Instruction Manual

Preventing damage to the camcorder

•
If the battery is leaking, remove it from the camcorder immediately. Clean the contacts before inserting a new
battery.
•
Use type NP60 lithium-ion batteries only.
•
Before inserting the battery, check that the contacts in the camcorder and on the batteries are clean. Clean the
battery connections if necessary with a clean, dry cloth or an eraser.
•
Do not touch the lens or lens mounting.
•
Only use the supplied mains adapter.
Preventing damage to the battery
•
Do not reverse the positive (+) and negative (−) terminals to avoid short-circuit.
•
Never allow the battery to come into contact with liquids.
•
Direct, intense heat can damage the battery. Therefore, do not expose the camcorder to any sources of direct
heat.
•
If the camcorder is not going to be used for long periods, remove the battery.
Preventing breakages
•
Do not drop the camcorder.
•
Place the strap around your wrist when carrying the camcorder.
Preventing data loss
•
Never interrupt the power supply when data are being processed.
Preventing damage to the SD/SDHC card
•
Never withdraw the SD/SDHC card from the camcorder while data are being processed or saved.
Protecting against condensation
•
Avoid rapid changes in temperature.
•
Place the camcorder in its protective case or a plastic bag before exposing it to any sudden changes in
temperature.
•
Do not immediately connect the device to the power supply if the unit has been moved from a cold
environment to a warm room. The device can safely be connected for charging as soon as the unit has
reached room temperature.
Do not use or store the camcorder in direct sunlight or at high temperatures.
At low temperatures, the capacity of the battery can drop significantly due to the reduced speed
of the chemical reactions. When recording in cold weather keep a second battery pack in reserve
in a warm place (e.g. trouser pocket).
This symbol on the camcorder certifies that the camcorder complies with EU guidelines (European
Union) on radiated emissions. CE stands for Conformité Européenne (European conformity)
The camera is for private use only and not intended for use by companies in the heavy industry
sector.

The Camcorder

Package contents

Check that the following parts have been supplied in the package:
3