Preventing damage to the eyes
•
Do not use the LED light close to anyone's eyes.
•
Always maintain a minimum distance of one metre when using
the LED light, especially with small children.
Preventing damage to the camcorder
•
If the battery is leaking, remove it from the camcorder immedi-
ately. Clean the contacts before inserting a new battery.
•
Use only the lithium-ion battery supplied.
•
Before inserting the battery, check that the contacts in the cam-
corder and on the batteries are clean. Clean the battery con-
nections if necessary with a clean, dry cloth or an eraser.
•
Do not touch the lens or lens mounting.
Preventi ng damage to the battery
•
Never insert the battery the wrong way round. Always ensure
the correct polarity at the +/- terminals.
•
Never allow the battery to come into contact with liquids.
•
Direct, intense heat can damage the battery. Therefore, do not
expose the camcorder to any sources of direct heat.
•
If the camcorder is not going to be used for long periods, re-
move the battery.
•
At low temperatures the capacity of the battery can drop sig-
nificantly due to the reduced speed of the chemical reactions.
When recording in cold weather keep a second battery pack in
reserve in a warm place (e.g. trouser pocket).
Preventing breakages
•
Do not drop the camcorder.
•
Place the strap around your wrist when carrying the camcord-
er.
9