Table of Contents
Advertisement
Evaporator Fan Not Running
Always check fan for obstruction first.
Unplug refrigerator to reset
main control board.
Warm freezer thermistor to 70 ˚F.
Set temperature controls to 5 and 5.
Reconnect power.
At the evaporator fan connector, check for
Unplug J2 connector on the main control board.
13 VDC from the red to white/silver wire
Check for 13 VDC between pins J2-8 and J2-3
and 8 to 13 VDC from the
Replace main
NO
and 8 to 13 VDC between pins J2-4 and J2-3.
NO
yellow/black to white/silver wire.
control board.
Is the voltage correct for both?
Is the voltage correct for both?
YES
YES
Replace
evaporator fan
Repair wiring between main control
motor.
board and evaporator fan motor.
– 37 –
Hide quick links:
Advertisement
Table of Contents
