More > Firewall >Ip Filter - SunComm SC-MOR600 User Manual

MOR600 Mobile Router
More > Firewall > IP Filter
IP Filters are used to deny any WLAN or LAN enable devices from accessing the
Internet through MOR600. The MOR600 Mobile Router can be setup to deny
internal computers by their IP addresses.
IP Filter Service: Select
Protocol Type: You can Select the TCP,
Chapter 6 Configuration
specific protocol type for the specific IP address. By
default the IP Filters is Disable.
Comment: You can add any note for your selected IP address.
Private IP: Add IP address of the WLAN or LAN enable devices that
is denied access to the Internet through MOR600.
denied access to the Internet.
Enable or Disable IP Filters Service. You can deny
UDP or Both protocol types that is
6
37