Table of Contents
Advertisement
MOR600 Mobile Router
This section will show you how to connect with your PC and configure your
new MOR600 mobile router using the web-based configuration utility.
Once properly configured, the MOR600 Mobile Router will obtain and assign
IP address information automatically. Configuration settings can be established
through the MOR600 Mobile Router Configuration Menu. You can access this
interface by performing the steps listed below:
Step 1: Connect your PC/Notebook to MOR600
Insert the Ethernet patch cable into LAN Port on the back panel of the
MOR600 Mobile Router, and an available Ethernet port on the network adapter in
the computer.
The MOR600 Mobile Router LAN Ports are "Auto-MDI/MDIX." This provides either
patch or crossover Ethernet cable LAN Port access.
Step 2: Open your browser Such as IE or Netscape and type Press
Enter
If you have changed the default IP Address assigned to the MOR600 Mobile
Router, ensure you enter the correct IP Address now.
Chapter 6 Configuration
Chapter 6 Configuration
http://192.168.1.1
in address bar.
6
..
14
Advertisement
Table of Contents
