SC-MOR600 Mobile Router User Guide Version: 0.3 2007-10-24...
Page 2
SC-MOR600 FEDERAL COMMUNICATIONS COMMISSION This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions :(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
SC-MOR600 Router How to Use This User Guide This document uses the following conventions to convey instructions and information. Look for the following items when reading this User Guide: This checkmark means there is a note of interest and is something you should pay special attention to while using the MOR600 Router for 3G/WiMAX Broadband service.
MOR600 Mobile Router Chapter 1 Introduction Welcome Thank you for choosing the MOR600 Mobile Router for 3.5G/WiMAX Broadband. The MOR600 is a universal communication device for professional permanent use in the office, at home or as a mobile hotspot – wherever no fast DSL or Cable connection is available.
MOR600 Mobile Router Features Provides Wireless Internet Access Anywhere at Anytime within a wireless broadband network. Standard PC card or USB Dongle with WiMAX/HSDPA/UMTS/EVDO/CDMA Data Card for Mobile Internet connectivity Elegant ID design with compact size as a mobile Hotspot. Enables multiple users at a location to share one wireless broadband connection to the Internet, email, corporate networks.
Chapter 2 Package Contents Verify Package Contents The MOR600 Mobile Router package should contain the items listed below. If any of the items are missing, please contact your reseller. • MOR600 Mobile Router • DC 5V, 2.0A Power Adapter Using a power supply with a different voltage rating than the one included with the MOR600 Mobile Router will cause damage and void the warranty for this product.
MOR600 Mobile Router • MOR600 Mobile Router Quick Installation Guide • MOR600 Mobile Router User Guide in CD-ROM. (Optional) System Requirements for Configuration • A compatible 32-bit PC Card or USB Data card with Broadband service from your Mobile Internet Service Provider. •...
MOR600 Mobile Router Chapter 3 Wireless Network Basics The MOR600 Mobile Router is based on industry open standards to provide easy-to-use and compatible high-speed wireless connectivity within your office, home or anywhere that broadband service available. The MOR600 Mobile Router allows you to access the data you want, when and where you want it.
Page 11
MOR600 Mobile Router 3. Building Materials make a difference. A solid metal door or aluminum studs may have a negative effect on range. Try to position access points, wireless routers, and computers so that the signal passes through drywall or open doorways. Materials and objects such as glass, steel, metal, walls with insulation, water (fish tanks), mirrors, file cabinets, brick, and concrete will degrade your wireless signal.
MOR600 Mobile Router Chapter 4 MOR600 Hardware Overview This Chapter will show you the MOR600 Router Hardware physical output and input Ports and connection. Rear Connections Default Button Press & Hold the Default Button 3~4 seconds to Load the Factory Default setting. USB Port (Optional) This USB Host port is for your USB Data Card connection.
MOR600 Mobile Router Side Button EZ Button This button is reserved for if it has new feature upgrade in the future. Front LED Power LED The power LED Will Turn ON to indicate power has been applied. Status LED These LED will show the Router connection status for the broadband service.
MOR600 Mobile Router Chapter 5 Hardware Installation Instructions This Chapter will show you how to install MOR600. Please follow the below each Step to set up your Router. Step 1: Insert your Data card to PC card slot or USB Port Data Card Before you Begin, make sure that your compatible 32-bit PC Card or USB Data...
Page 15
MOR600 Mobile Router When connect the power adapter to back panel power Jack 。The power LED will turn ON to indicate power has been applied. Power Step 3: Check Status LED When Power ON the MOR600, The MOR600 Will Auto to detect and initial Your Date Card。Then status LED Will Flash ON and OFF One by one as MOR600 Performs initialization and Internet connection process 。...
Page 16
MOR600 Mobile Router Step 4: Congratulation! You have Connected With Wireless Internet MOR600 is PnP for your Data card. It Will Auto Configuration and enable the wireless LAN. The default wireless ESSID will be mobile-router and DHCP server will enable. And the default wireless security set as none. You can use your wireless or LAN device to link with the Router and connect to Internet.
MOR600 Mobile Router Chapter 6 Configuration This section will show you how to connect with your PC and configure your new MOR600 mobile router using the web-based configuration utility. Once properly configured, the MOR600 Mobile Router will obtain and assign IP address information automatically.
Page 18
MOR600 Mobile Router Step 3: Login Mobile Route • Enter your user name in the Username box. The default user name is admin. • Enter your password in the Password box. The default password is admin. Note: Note that the user name and password are case sensitive. For example: ADMIN is not the same as admin.
MOR600 Mobile Router Step 5: Web Configuration There are two modes for the Web Configuration. One is EASY mode that is Basic setting for MOR600 Router. Another mode is MORE mode. If you need to set more advance feature for your Router. You can click MORE and set that want to change item.
Page 20
MOR600 Mobile Router More > WWAN> Active Profile Dial Number: The default is *99#. This field should not be altered unless required by your service provider. User Name: Enter the new User Name for your Data card connection. Password: Enter the new Password for your Data card connection. APN: Enter the name of your service Provider Network.
MOR600 Mobile Router Easy > WLAN Click WLAN for wireless network setting Chapter 6 Configuration...
Page 22
MOR600 Mobile Router Easy > WLAN> Active Profile SSID: Service Set Identifier (SSID) is the name of your wireless network. Create a name using up to 32 characters. The SSID is case-sensitive. The default is mobilerouter. Encryption: You may select from two levels of encryption to secure your wireless network:None or WEP.
MOR600 Mobile Router Easy > LAN Click for Local Network setting Chapter 6 Configuration...
Page 24
MOR600 Mobile Router Easy > LAN> Active Profile DHCP Server: This setting is used to configure MOR600’s Dynamic Host Configuration Protocol (DHCP) server function. MOR600 can be used as a DHCP server for the internal LAN network. The DHCP server automatically assigns an IP address to each computer in the LAN network..
MOR600 Mobile Router MORE Mode (Advance Setting) More > WWAN Click WWAN for WWAN Networking Setting Chapter 6 Configuration...
Page 26
MOR600 Mobile Router More > WWAN> Active Profile Dial Number: The default is *99#. This field should not be altered unless required by your service provider. User Name: Enter the new User Name for your Data card connection. Password: Enter the new Password for your Data card connection. APN: Enter the name of your service Provider Network.
MOR600 Mobile Router More > WLAN > Basic SSID: Enter your SSID name in the field provided. SSID names can contain up to 32 ASCII characters. Channel: Indicates the channel setting for the MOR600. By default the channel is set to 6. The Channel can be changed to fit the channel setting for an existing wireless network or to customize the wireless network.
MOR600 Mobile Router More > WLAN > Advanced Chapter 6 Configuration...
Page 30
MOR600 Mobile Router Authentication: You may select Open System, Shared Key or Auto. The default is Auto. If you select Open System, your network will not be secure. Select Shared Key to create a secure network authentication between your WLAN host and the MOR600 Mobile Router.
MOR600 Mobile Router More > WLAN > Security (None) Encryption: You may select from three levels of encryption to secure your wireless network: None, WEP, WPA-PSK, and WPA2-PSKor WPA2-PSK Mixed. The default is None: for No Encryption Chapter 6 Configuration...
MOR600 Mobile Router More > WLAN > Security (WEP) Encryption : Key Length: Two levels of wireless encryption are available: bits and bits. Key Type: Two type of WEP Key:Hex or ASCII. Select the proper one for key Setting. Key1~Key4: Input up to 4 WEP keys; select the one you want to use. To ensure access to your MOR600 Mobile Router Configuration Menu, and the Internet, your encryption and WiFi settings must match.
MOR600 Mobile Router More > WLAN > Security (WPA-PSK) Encryption : WPA-PSK authenticates users based on a Passphrase. The default setting does not contain a Passphrase WPA Cipher Select TKIP as Cipher key. Suite: Pre-Shared Key Select PSK Format: PassPhrase HEX.
MOR600 Mobile Router More > WLAN > Security (WPA2-PSK) Encryption : WPA2-PSK authenticates users based on a Pass Phrase. The default setting does not contain a Pass Phrase WPA Cipher Select TKIP as Cipher key. Suite: Pre-Shared Key Select PSK Format : PassPhrase Format: Pre-Shared Key: To enable your WPA2-PSK, enter your eight to 63...
MOR600 Mobile Router More > WLAN > Security (WPA2-PSK Mixed) Encryption : WPA-PSK Mixed authenticates users based on a PassPhrase. The default setting does not contain a PassPhrase WPA Cipher Select TKIP as Cipher key. Suite: Pre-Shared Key Select PSK Format : PassPhrase Format: Pre-Shared Key: To enable your WPA-PSK Mixed, enter your eight to 63...
MOR600 Mobile Router More > WLAN > MAC Filter Use MAC (Media Access Control) Filters to deny WLAN (Wireless Local Area Network) enable devices by their MAC addresses from accessing the Network. You can manually add a MAC address to the list. MAC Filter Active: Select Enable MAC filters and deny MAC addresses listed below.
MOR600 Mobile Router More > LAN Click for Local Network setting Chapter 6 Configuration...
Page 38
MOR600 Mobile Router More > LAN > Active Profile Domain Name : Enter the Domain name (Optional). IP Address : Enter the IP address of the router. The default IP address is 192.168.1.1. If you change the IP address, once you click Apply, you will need to enter the new IP address in your browser to get back into the configuration utility.
MOR600 Mobile Router More > Firewall Firewall Rules is an advanced feature used to deny traffic from passing through the MOR600 Mobile Router. It works in the same way as IP Filters with additional settings. You can create more detailed access rules for the MOR600 Mobile Router. When virtual services are created and enabled, it also displays in Firewall Rules.
MOR600 Mobile Router More > Firewall > IP Filter IP Filters are used to deny any WLAN or LAN enable devices from accessing the Internet through MOR600. The MOR600 Mobile Router can be setup to deny internal computers by their IP addresses. IP Filter Service: Select Enable Disable...
MOR600 Mobile Router More > Firewall > MAC Filter MAC Filter Active: Select Enable MAC filters and deny MAC addresses listed below. By default the MAC Filters is Disabled MAC Filter. MAC: Enter the MAC Address that is denied access to the Internet.
MOR600 Mobile Router More > Firewall > Port Filter Port Filter Select Enable Disable Port filters; Deny Port listed Service: below. By default the Port Filters is Disable. Comment: You can add any note for your selected Ports. Protocol Type: You can Select the TCP, UDP Both port types that is...
MOR600 Mobile Router More > DHCP Server DHCP stands for Dynamic Host Control Protocol. The M O R 6 0 0 has a built-in DHCP server. The DHCP Server will automatically assign an IP address to the devices on the WLAN or LAN private network. Be sure to set your devices to be DHCP clients by setting their TCP/IP settings to “Obtain an IP Address automatically.
Page 44
MOR600 Mobile Router More > DHCP Server > Active Profile DHCP Server: Select Enable Disable for DHCP server function on your router. The default is Enable. Start IP Address: Enter the starting IP addresses for the DHCP server’s IP assignment. The default is 192.168.1.100. End IP Address: Enter the ending IP addresses for the DHCP server’s IP assignment.
MOR600 Mobile Router More > Tools > Administrator This page will allow you to change the Username and Password for Administrator. Username: Enter a new Login Name for the user account. The default is admin. New Password: Enter a new password for the user Login Name. Confirm Password: Confirm again for the Password Chapter 6 Configuration...
MOR600 Mobile Router More > Tools > Firmware Upgrade You can upgrade the firmware of the Router here. Make sure the firmware you want to use is on the local hard drive of the computer. Click on Browse to locate the firmware file to be used for the update.
MOR600 Mobile Router More > Tools > Save/Reload Setting The current system settings can be saved as a file onto the local hard drive. The saved file, or any other saved settings file, can be loaded back on the Broadband Router. To reload a system settings file, click on Browse to browse the local hard drive and locate the system file to be used.
MOR600 Mobile Router More > Status This page displays the current status information for the MOR600 Router. It will display the Firmware version, Web version, WAN, WAN, and LAN information. Chapter 6 Configuration...
MOR600 Mobile Router More > Status > WWAN IP Address: To display WWAN port IP Address. Signal Strength: To displays WLAN signal strength. ISP: Displays which device is connected to the MOR600 Mobile Router Linking Status: Display current WWAN port Link status. Mode: Display current Encryption Type.
MOR600 Mobile Router More > Status > WLAN SSID: Displays the current SSID. By default the SSID is mobile-router. Channel: Displays the current channel. By default the Channel is Security: Indicates whether WEP is enabled or disabled. By default, Security is Disable. MAC Address: Displays the wireless MAC address Chapter 6 Configuration...
MOR600 Mobile Router More > Status > LAN IP Address: Displays the LAN IP address Subnet Mask: Displays the LAN Subnet Mask MAC Address: Displays the LAN MAC address Chapter 6 Configuration...
MOR600 Mobile Router Appendix A: Technical Specification WWAN Port HSDPA / UMTS / EVDO / EDGE / CDMA / WiMAX Data Card (Standard PC Card Slot or USB port ) HSDPA: up to 7.2 MB/s WWAN Data rates UMTS: up to 384 KB/s EDGE: up to 237 KB/s GPRS: up to 85.6 KB/s IEEE802.11b/g...
Page 57
MOR600 Mobile Router Appendix A: Technical Specification EZ Button.(Reserved for new feature) Button Load Default button Update ability Firmware-Update per Software-Upload Independent of user system software Compatibility Operable with all common browsers (e.g. MS Internet Explorer, Netscape, Mozilla Firefox) PC Card Slot Power Jack Ports Ethernet 10/100 Base-T via RJ45-plug...
Page 58
Output 5VDC / 2A Supported norms FCC Part 15 Class B * Subject to change without notice SunComm Technology Co., Ltd 7F, No. 53, Jian Kang Road, Chung Ho City, Taipei Hsien, Taiwan 23586 Tel: 886-2-3234 1496 Fax: 886-2-3234 1393 E-mail: sales2@suncomm.com.tw...
Need help?
Do you have a question about the SC-MOR600 and is the answer not in the manual?
Questions and answers