Technical Specifications - Promowide SP1290 User Manual

TECHNICAL SPECIFICATIONS

Transmission Mode
Carrier Frequency
Operation Voltage
Frequency Response
Distortion
S/N Ratio
Operation Distance
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Should you have any questions, please feel free to visit our website:
www.promowide.com or send email to us: info@promowide.com.
: UHF stereo
: 900 MHz
: Transmitter, DC 12.5V 150mA
Speakers, 6 x AA size Alkaline batteries (not
included) or 12V 550mA 2x AC/DC adapters
(included)
Headphone, 2 x AAA size Rechargeable
batteries (included)
: 40Hz – 12KHz
: 1%
: 65dB
: Up to 150 feet
P.7