Installation - Promowide SP1290 User Manual

INSTALLATION

TRANSMITTER
1. Insert the antenna tube into the antenna wire.
2. Connect the supplied AC/DC power adapter to an electrical wall outlet.
3. Plug the AC/DC power adapter in the DC jack located on the rear of the
transmitter.
4. The rear of the transmitter has one audio cord that can be connected to audio
output jack of TV, Monitor, VCR, Radio recorder, CD/MP3/VCD/DVD players or
to headphone/earphone jack with the connector provided.
Plug the adapter in the AC source and connect the audio plug to the audio source.
As soon as the transmitter is receiving the audio signal, it will automatically switch
on and the red LED will light up.
SPEAKER RECEIVER
1. Insert 6 pieces "AA" size ALKALINE batteries into the battery compartment with
correct polarity at the rear of the speakers OR connect the 12V power adapters
to the DC input jacks on the rear of each speaker, then plug it to the wall AC
outlet.
2. Press On/Off button and turn the speakers ON.
The Power LED will light up in red. Switch off the
speakers by pressing the ON/OFF button on the
speakers, and the LED will be off.
P.3